|
Frequently Asked Questions
|
Primary Kits
. |
| 18. |
Q. |
Why have you provided the no go gage attached to the cap on the stretcher?
. |
|
A. |
So that an installer can check that the kit is suitable for the cable being used, and so that the size can also be easily verified during or after commissioning. It is important that these kits be the proper size for the cable they are installed on. Unfortunately, it appears that sometimes installers will install a size that is too big for the cable, either in the interests of expediency, or because installation is easier. The problem is that sooner or later this will cause failure.
|
|
|
|
|
|
